As Enduro riders, once the dirt bike gets out of track, returning it into riding position might prove to be a difficult task and can result in a loss of valuable time. It demands significant effort and creates a situation where an error can lead to a major failure.

Rieju 2020-2024 Rear Lift Strap 2.0

$34.99

Quantity

- Lightweight & built to endure.

- Easy & fast installation.

- 100% Double nylon.

- 100% Abrasion resistant neoprene handle cover.
This part has been specially designed for all Reiju 2020 - 2024 Off-road / Enduro dirt bikes (200cc to 300cc) 2 stroke models.

IMPORTANT: TAIL LIGHT PLASTIC MUST BE REMOVED.

If you still need to use your tail light plastic you will need a special accessory to mount the rear lift strap on your dirt bike. If so, please contact us so that we can put you in touch with the person who makes this special accessory
IMPORTANT: TAIL LIGHT PLASTIC MUST BE REMOVED.

If you still need to use your tail light plastic you will need a special accessory to mount the rear lift strap on your dirt bike. If so, please contact us so that we can put you in touch with the person who makes this special accessory.

Use the following Hardware:

- 01 Rear lift strap.

- 02 Hex head screws (25mm).

- 02 Washers.

Installation Instructions:

1. Fold the tip of the strap.

2. Insert the bolt into the washer.

3. Insert the bolt to the 3rd hole of the strap (3rd hole from the tip).

4. Insert the bolt to the 1st hole.

5. Tighten the bolt to the dirt bike.

6. Repeat on the other side.

Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.

< Back to Home

Rieju 2020-2024 Rear Lift Strap 2.0

Product Features

Fitment

Installation Instructions

Return Policy

SUBSCRIBE