REAR LIFT STRAP FOR ALL MODELS 2020-2023 EXCEPT XC/SX
Use the following Hardware:
- 01 Rear Lift Strap.
- 02 Hex Head Screws (40mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 3rd hole (3rd hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the head head screw under the fender.
4. Repeat on the other side.
REAR LIFT STRAP FOR 2020-2023 XC/SX MODELS
Use the following Hardware:
- 01 Rear Lift Strap.
- 02 Hex Head Screws (25mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 2nd hole (2nd hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
REAR LIFT STRAP FOR ALL 2024 & 2025 MODELS EXCEPT XC/SX
Use the following Hardware:
- 01 Rear Lift Strap.
- 02 Hex Head Screws (40mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 1st hole (1st hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
REAR LIFT STRAP FOR 2024 & 2025 XC/SX MODELS
Use the following Hardware:
- 01 Rear Lift Strap.
- 02 Hex Head Screws (25mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 1st hole (1st hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
Installation Tips:
- To ensure the tire doesn't come into contact with the strap, during installation position the strap towards the front of the bike. This will help prevent the strap from twisting or turning towards the back when you tighten it.
- We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
- If you have Acerbis plastics installed on your 2020-23 dirt bike, use the 2nd hole for an adequate fitment (2nd hole from the tip).
