As Enduro riders, once the dirt bike gets out of track, returning it into riding position might prove to be a difficult task and can result in a loss of valuable time. It demands significant effort and creates a situation where an error can lead to a major failure.
KTM 2020-2024 Rear Lift Strap 2.0
- Lightweight & built to endure.
- Easy & fast installation.
- 100% Double nylon.
- 100% Abrasion resistant neoprene handle cover.
This part has been specially designed for all KTM 2020 - 2024 Off-road / Enduro dirt bikes 2 stroke and 4 stroke models (250cc to 500cc).
REAR LIFT STRAP FOR ALL MODELS 2020-2023 EXCEPT XC/SX
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex Head Screws (40mm).
- 02 Unthreaded Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 3rd hole (3rd hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the head head screw under the fender.
4. Repeat on the other side.
Note 01: Take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
Note 02: If you have Acerbis plastics installed on your 2020-23 dirt bike, use the 2nd hole for an adequate fitment (2nd hole from the tip).
REAR LIFT STRAP FOR 2020-2023 XC/SX MODELS
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex Head Screws (25mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 2nd hole (2nd hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
Note: Take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
REAR LIFT STRAP FOR ALL 2024 MODELS EXCEPT XC/SX
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex Head Screws (40mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 1st hole (1st hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
Note: Take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
REAR LIFT STRAP FOR 2024 XC/SX MODELS
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex Head Screws (25mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 1st hole (1st hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
Note: Take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
- All sales are final.
- No refunds accepted.
- Exchange Policy: Product returns are only accepted due to manufacturing defects, prior to installation or use of the product.