Front Lift Strap
Use the following Hardware:
- 01 Lift strap.
- 04 aluminum tabs.
- 02 bolts.
- 02 flanged nuts.
- 04 zip ties.
Installation Instructions:
1. Loop one side of the strap around the fork (under the triple clamp).
2. Insert one of the bolts to the rectangular aluminum tab.
3. Insert the bolt together with the tab in the hole of the strap (from the outside).
4. Insert the bolt through the second hole (hole in the tip of the strap).
5. Insert the second tab and then secure the nut (loosely).
6. Loop a zip tie around the fork on the upper part of the triple clamp.
7. Once it's all in place, insert a 2nd zip tie from under the strap and loop it to the 1st zip tie (step 6).
8. Adjust both zip ties and then the bolt & nut firmly.
9. Repeat the installation process for the other side.
Installation Video
Note: Take a look at the pictures to help you understand how you should place the bolt, nut and tabs as well as the zip ties correctly.
Rear Lift Strap (For all models except 2017-19 XC/SX)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Insert the bolt to the aluminum spacer.
2. Fold the tip of the strap.
3. Insert the bolt with the spacer into the 3rd hole of the Strap (3rd hole from the tip).
4. Insert the bolt to the 1st hole.
5. Tighten the bolt to the dirt bike.
6. Repeat on the other side.
Note: Please take a look at the pictures for correct installation.
Rear Lift Strap (Only for 2017-18 XC)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Unthreaded Spacers.
Installation Instructions:
Rear Lift Strap must be fixed under the fender using the factory cupped washer, then the unthreaded spacer, then the strap and finally the bolt.
Rear Lift Strap (Only for 2019 XC/SX)
Use the following Hardware:
- 01 Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Insert the hex head screw to the spacer.
2. Insert the hex head screw to the 1st hole (1st hole from the tip of the strap).
3. Fix the head head screw under the fender.
4. Repeat on the other side.
Note: Take a look at the pictures for correct installation.
