Rear Lift Strap
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex head screws (25mm).
- 02 Aluminum spacers.
- 02 Washers.
INSTALLATION INSTRUCTIONS FOR ALL HUSQVARNA 2020-2023 EXCEPT TX/FX 2023
1. Insert the bolt to the washer.
2. Insert the bolt to the 3rd hole of the strap (3rd from the tip).
3. Insert the bolt to the aluminum spacer.
4. Tighten the bolt to the dirt bike (lower attachment point).
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
INSTALLATION INSTRUCTIONS FOR TX/FX 2023-2025
1. Insert the bolt to the washer.
2. Insert the bolt to the 3rd hole (3rd hole from the tip).
3. Insert the bolt to the aluminum spacer.
4. Fix the bolt to the bike (upper attachment point).
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
INSTALLATION INSTRUCTIONS FOR HUSQVARNA TE 2024 & 2025
WITHOUT tail light plastic:
1. Insert the bolt to the washer.
2. Insert the bolt to the 3rd hole (3rd hole from the tip).
3. Insert the bolt to the aluminum spacer.
4. Fix the bolt to the bike (upper attachment point).
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
WITH tail light plastic:
1. Insert the bolt to the washer.
2. Insert the bolt to the 1st hole (1st hole from the tip).
3. Insert the bolt to the aluminum spacer.
4. Fix the bolt to the bike (lower attachment point).
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
