Engineered to offer the rider a rugged and efficient accessory to pull out the dirt bike when stuck in between rocks, loose sand, fesh-fesh or any other terrain. With the Lift Strap Kit, you’ll be able to rapidly pull out the dirt bike and get back on track.
Husqvarna 2020-2024 Lift Strap Kit 2.0
- Lightweight & built to endure.
- Easy & fast installation.
- Installation doesn’t require disassembly of any major parts of the dirt bike.
- 100% Double nylon.
- 100% Abrasion resistant neoprene handle cover.
This part has been specially designed for Husqvarna 2020 - 2024 Off-road/Enduro dirt bikes all 2T & 4T models (250cc to 500cc).
FRONT LIFT STRAP
Use the following Hardware:
- 01 Lift strap.
- 04 T-shaped aluminum tabs.
- 02 Button socket head cap bolts (25mm M6 bolts).
- 02 Button socket head cap bolts (20mm M4 bolts).
- 02 flanged serrated nuts (M6).
- 02 flanged nuts (M4).
- 04 zip ties.
Installation Instructions:
1. Loop one side of the strap around the fork (under the triple clamp).
2. Insert one of the 25mm M6 bolts to the T-shaped aluminum tab.
3. Insert the 25mm M6 bolt with the T-shaped aluminum tab into the big hole of the strap (from the outside part of the strap).
4. Insert the bolt through the second hole (big hole in the tip of the strap).
5. Insert the second tab and then secure the M6 flanged serrated nut (loosely).
6. Insert the 20mm M4 bolt to the T-shaped aluminum tab and pass it all the way through.
7. Secure the M4 flanged nut (loosely).
8. Loop a zip tie around the fork on the upper part of the triple clamp.
9. Insert a 2nd zip tie from under the strap and loop it to the 1st zip tie.
10. Adjust both zip ties and then fix the bolts & nuts firmly. Note: You can add a small drop of Loctite (242 Blue) between the bolts & nuts to keep them always secured.
11. Repeat the installation process on the other side.
Note: Take a look at the pictures to help you understand how you should place correctly the bolts, nuts and tabs as well as the zip ties.
Rear Lift Strap
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex head screws (25mm).
- 02 Aluminum spacers.
- 02 Washers.
INSTALLATION INSTRUCTIONS FOR ALL HUSQVARNA 2020-2023 EXCEPT TX/FX 2023
1. Insert the bolt to the washer.
2. Insert the bolt to the 3rd hole of the strap (3rd from the tip).
3. Insert the bolt to the aluminum spacer.
4. Tighten the bolt to the dirt bike (lower attachment point).
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
INSTALLATION INSTRUCTIONS FOR TX/FX 2023-2024
1. Insert the bolt to the washer.
2. Insert the bolt to the 3rd hole (3rd hole from the tip).
3. Insert the bolt to the aluminum spacer.
4. Fix the bolt to the bike (upper attachment point).
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
INSTALLATION INSTRUCTIONS FOR HUSQVARNA TE 2024
WITHOUT tail light plastic:
1. Insert the bolt to the washer.
2. Insert the bolt to the 3rd hole (3rd hole from the tip).
3. Insert the bolt to the aluminum spacer.
4. Fix the bolt to the bike (upper attachment point).
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
WITH tail light plastic:
1. Insert the bolt to the washer.
2. Insert the bolt to the 1st hole (1st hole from the tip).
3. Insert the bolt to the aluminum spacer.
4. Fix the bolt to the bike (lower attachment point).
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
- All sales are final.
- No refunds accepted.
- Exchange Policy: Product returns are only accepted due to manufacturing defects, prior to installation or use of the product.