As Enduro riders, once the dirt bike gets out of track, returning it into riding position might prove to be a difficult task and can result in a loss of valuable time. It demands significant effort and creates a situation where an error can lead to a major failure.
Beta 2016-2025 Rear Lift Strap 2.0
- Lightweight & built to endure.
- Easy & fast installation.
- 100% Double nylon.
- 100% Abrasion resistant neoprene handle cover.
This part has been specially designed for all Beta 2016 - 2025 Off-road / Enduro dirt bikes (250cc to 500cc) 2 stroke and 4 stroke models.
2016-19 models
2020-24 models (without tail light)
2016-22 X-trainer models
2023-24 X-trainer models (without tail light)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Washers.
Installation Instructions:
1. Insert the bolt to the washer.
2. Insert the bolt into the 2nd hole of the Strap (2nd hole from the tip).
3. Tighten the bolt to the dirt bike.
4. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
2020-24 RR models (with tail light)
2023-24 X-trainer models (with tail light)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Aluminum Spacers.
- 02 washers.
Installation Instructions:
1. Insert the 25mm bolt to the washer.
2. Insert the bolt to the 1st hole of the Strap (1st hole from the tip).
3. Insert the bolt to the aluminum spacer.
4. Tighten the bolt to the dirt bike.
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
2025 models (without tail light)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Washers.
- 02 Aluminum Spacers.
Installation Instructions:
1. Insert the bolt to the aluminum spacer and then to the washer.
2. Insert the bolt into the 2nd hole of the Strap (2nd hole from the tip).
3. Tighten the bolt to the dirt bike.
4. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
2025 models (with tail light)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 washers.
Installation Instructions:
1. Insert the 25mm bolt to the washer.
2. Insert the bolt to the 1st hole of the Strap (1st hole from the tip).
3. Tighten the bolt to the dirt bike.
4. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
- All sales are final.
- No refunds accepted.
- Exchange Policy: Product returns are only accepted due to manufacturing defects, prior to installation or use of the product.