2016-19 models
2020-24 models (without tail light)
2016-22 X-trainer models
2023-24 X-trainer models (without tail light)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Fold the tip of the strap.
2. Insert the bolt to the aluminum spacer.
3. Insert the bolt with the spacer into the 3rd hole of the Strap (3rd hole from the tip).
4. Insert the bolt to the 1st hole.
5. Tighten the bolt to the dirt bike.
6. Repeat on the other side.
Note: Please take a look at the pictures for correct installation.
2020-24 RR models (with tail light)
2023-24 X-trainer models (with tail light)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (40mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Insert the 40mm bolt into the 3rd hole of the Strap (3rd hole from the tip).
2. Insert the bolt to the 1st hole.
3. Insert the bolt to the spacer.
4. Tighten the bolt to the dirt bike.
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation.
