2016-19 models
2020-24 models (without tail light)
2016-22 X-trainer models
2023-24 X-trainer models (without tail light)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Washers.
Installation Instructions:
1. Insert the bolt to the washer.
2. Insert the bolt into the 2nd hole of the Strap (2nd hole from the tip).
3. Tighten the bolt to the dirt bike.
4. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
2020-24 RR models (with tail light)
2023-24 X-trainer models (with tail light)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Aluminum Spacers.
- 02 washers.
Installation Instructions:
1. Insert the 25mm bolt to the washer.
2. Insert the bolt to the 1st hole of the Strap (1st hole from the tip).
3. Insert the bolt to the aluminum spacer.
4. Tighten the bolt to the dirt bike.
5. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.