This part has been specially designed for all TM 2022 - 2027 Off-road / Enduro dirt bikes 2 stroke models.

Use the following Hardware:

 

- 01 Strap.

- 02 Hex Head Screws (25mm).

- 02 Washers.

 

Installation Instructions:

 

1. Insert the bolt into the washer.

2. Insert the bolt to the 1st hole of the strap (1st hole from the tip).

3. Tighten the bolt to the dirt bike.

4. Repeat on the other side.

 

Installation Tips:

 

- Please take a look at the pictures for correct installation.

 

- We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.

All of our straps are built to withstand the rigors of hard enduro riding. We offer a full 1-year product replacement guarantee that covers any manufacturing defects in materials and workmanship. This warranty does not cover damage or breakage caused by improper installation, failure to follow provided instructions, or lack of proper clearance on soft suspension setups. This warranty also does not cover normal wear and tear, as that does not affect the functional strength of the strap.

- All Sales Are Final: All sales are final and we do not accept returns or exchanges.
- Exception for Defective Products: If you receive a product with a manufacturing defect, please see our Warranty section.

Avoid directing a full stream of high-pressure water onto the strap. Concentrated, full-force water pressure can cause damage over time. We recommend spot-cleaning the strap using low-pressure rinsing.

- Bolt Security: We recommend adding a small drop of Loctite (242 Blue) on the bolts to keep them always secured.