- Lightweight & built to endure.

- Easy & fast installation.

- 100% Double nylon.

- 100% Abrasion-resistant neoprene handle cover.

This part has been specially designed for all Gasgas 2020 - 2027 Off-road / Enduro dirt bikes (250cc to 350cc) 2 stroke and 4 stroke models.

REAR STRAP FOR 2020-23 MODELS

 

Use the following Hardware:

 

- 01 Strap.

- 02 Hex Head Screws (40mm).

- 02 Aluminum Spacers.

- 04 Washers.

 

Installation Instructions:

 

1. Insert the hex head screw to the washer.

2. Insert the bolt to the 3rd hole (3rd hole from the tip).

3. Insert the head hex screw to a second washer and then to the aluminum spacer.

5. Fix the hex head screw under the rear fender.

6. Repeat on the other side.

 

REAR STRAP FOR 2024-2027 EC MODELS

 

Use the following Hardware:

 

- 01 Strap.

- 02 Hex Head Screws (40mm).

- 02 Aluminum Spacers.

- 04 Washers.

 

Installation Instructions:

 

1. Insert the hex head screw to the washer.

2. Insert the hex head screw to the 1st hole (1st hole from the tip).

3. Insert the screw to a second washer and then to the aluminum spacer.

4. Fix the head head screw under the rear fender.

5. Repeat on the other side.

 

REAR STRAP FOR 2024-2027 EX MODELS

 

Use the following Hardware:

 

- 01 Strap.

- 02 Hex Head Screws (40mm).

- 02 Aluminum Spacers.

- 04 Washers.

 

Installation Instructions:

 

1. Insert the hex head screw to the washer.

2. Insert the hex head screw to the 2nd hole (2nd hole from the tip).

3. Insert the screw to a second washer and then to the aluminum spacer.

4. Fix the head head screw under the rear fender.

5. Repeat on the other side.

 

Installation Tips:

 

- Take a look at the pictures for correct installation.

 

- We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.

All of our straps are built to withstand the rigors of hard enduro riding. We offer a full 1-year product replacement guarantee that covers any manufacturing defects in materials and workmanship. This warranty does not cover damage or breakage caused by improper installation, failure to follow provided instructions, or lack of proper clearance on soft suspension setups. This warranty also does not cover normal wear and tear, as that does not affect the functional strength of the strap.

- All Sales Are Final: All sales are final and we do not accept returns or exchanges.
- Exception for Defective Products: If you receive a product with a manufacturing defect, please see our Warranty section.

Avoid directing a full stream of high-pressure water onto the strap. Concentrated, full-force water pressure can cause damage over time. We recommend spot-cleaning the strap using low-pressure rinsing.

- Bolt Security: We recommend adding a small drop of Loctite (242 Blue) on the bolts to keep them always secured.