Built to survive the gnarliest tracks, our Pro Racing XT Pull Strap Kit is your ultimate front-and-rear recovery system when you're buried axle-deep in rock gardens, loose scree, fesh-fesh, or impossible hill climbs. Both straps are crafted from heavy-duty double nylon and wrapped in high-grade, abrasion-resistant neoprene sleeves to give you a comfortable, secure grip when wrestling your bike out of a hole, getting you unstuck fast so you can keep moving.

Forget wasting hours in the garage. Our custom-engineered design offers a zero-hassle, bolt-on installation on both ends, with both components adding a custom, high-end look to your ride:

Up Front: The strap mounts securely around the fork tubes and bolts straight through—no suspension teardown required.

Out Back: The strap anchors directly to the sub-frame for a seamless fit, giving you maximum pulling leverage.

We engineered this kit to take an absolute beating. The front strap uses a 3-piece, single-bolt setup for perfect angle control, fortified with bombproof aluminum tabs per side that compress the webbing to completely distribute extreme forces. Matching that strength, the rear strap provides a rock-solid foundation that distributes massive pulling forces under extreme tension so you can pick your bike up without missing a beat.

Each setup features rugged hardware built for technical trail riding, finished with hand-burned tips for a clean, factory-fresh look.

Stop fighting the terrain and start conquering it—bolt on your Pro Racing XT Pull Strap Kit and ride with the confidence to push your limits.

2016-2027 Beta Pro Racing XT Pull Strap Kit (Front + Rear) | NSX Factor

Name: 2016-2027 Beta Pro Racing XT Pull Strap Kit (Front + Rear) | NSX Factor
SKU: NSX-K-003
Price: 74.95 USD
Availability: OutOfStock

$74.95

Brand

Model

Year

Quantity

OUT OF STOCK

FRONT STRAP

Use the following Hardware:

01 Main Pull Strap
02 Secondary Straps
02 Bolts
02 Nylon Lock Nuts
04 Aluminum Tabs
04 Zip Ties

Installation Instructions:

1. Wrap the Secondary Strap: Take one of the small secondary straps and wrap it around the bike's fork tube, just below the lower triple clamp. Ensure the tips of the strap face forward.

2. Align the Main Strap: Place one end of the main strap between the two overlapping tips of the secondary strap.

3. Prep the Bolt: Slide an aluminum tab onto one of the mounting bolts.

4. Insert the Bolt: Push the bolt through all three aligned eyelet holes from the outside facing inward, ensuring the rounded head of the bolt faces out.

5. Add the Inner Tab: Slide a second aluminum tab onto the exposed end of the bolt on the inside of the mount.

6. Hand-Tighten the Hardware: Thread the nylon lock nut onto the bolt by hand. Leave it loose enough so you can adjust the angle of the main strap and easily access the back of the secondary strap to install the zip ties.

7. Position the First Zip Tie: Loop a zip tie around the fork tube just above the lower triple clamp.

8. Anchor the Second Zip Tie: Thread a second zip tie from behind, routing it underneath the secondary strap, and loop it directly through the first zip tie you just installed.

9. Secure and Tighten: Adjust the position of the zip ties to pin the secondary strap firmly in place. Tighten the bolt and nut securely to lock the main strap at your preferred pulling angle.

10. Repeat on the Opposite Side: Follow the exact same process to complete the other side of the fork.

Soft Suspension Setup & Clearance

If you run a soft suspension setup, the union between the main strap and the bolt may contact your fork guards during full compression. Failing to ensure proper clearance can cause the strap to break due to impact. If you run a soft setup, you must install the mount using one of the configurations below to prevent damage:

- Option A: Rotate the entire mount assembly slightly outward so the strap union completely clears the guards.

- Option B: Trim the very top edge of the plastic fork guards to create a clear path for the hardware.

Important Notes

1. Optimal Leverage Point: The front strap's intended and secure installation point is directly under the triple clamp. This ensures the strap is at the optimal angle for pulling, significantly enhancing your leverage.

2. Prioritize the Brake Cable Side: Begin installation on the brake cable side first. Completing this side initially creates more working room, making the opposite side much easier to manage.

3. Utilize Lower Strap Positioning for Easier Assembly: To facilitate a smoother installation, start by positioning the strap lower on the fork tube where it narrows. Assemble all components loosely, just threading the bolts and nuts. Once assembled, slide the entire strap setup upward into its final position and then securely tighten the zip ties and all fasteners.

REAR STRAP FOR MODELS:

2016-19

2020-24 (NO TAIL LIGHT)

2016-22 X-TRAINER

2023-24 X-TRAINER (NO TAIL LIGHT)

Use:

- 01 Strap.

- 02 25mm Bolts.

- 02 Washers.

Instructions:

1. Insert the bolt to the washer.

2. Insert the bolt into the 2nd hole from the tip of the strap.

3. Tighten the bolt to the dirt bike.

4. Repeat.

REAR STRAP FOR MODELS:

2020-24 RR (WITH TAIL LIGHT)

2023-24 X-TRAINER (WITH TAIL LIGHT)

Use:

- 01 Strap.

- 02 25mm Bolts.

- 02 Spacers.

- 04 Washers.

Instructions:

1. Insert the bolt to the washer.

2. Insert the bolt to the 1st hole from the tip.

3. Insert the bolt to a 2nd washer and then to the spacer.

4. Tighten the bolt to the dirt bike.

5. Repeat.

REAR STRAP FOR ALL 2025-27 MODELS (NO TAIL LIGHT)

Use:

- 01 Strap.

- 02 25mm Bolts.

- 02 Washers.

- 02 Spacers.

Instructions:

1. Insert the bolt to the spacer and then to a washer.

2. Insert the bolt into the 2nd hole.

3. Tighten the bolt to the dirt bike.

4. Repeat.

REAR STRAP FOR ALL 2025-27 MODELS (WITH TAIL LIGHT)

Use:

- 01 Strap.

- 02 25mm Bolts.

- 02 washers.

Instructions:

1. Insert the bolt to the washer.

2. Insert the bolt to the 1st hole from the tip of the strap.

3. Tighten the bolt to the dirt bike.

4. Repeat.
All of our straps are built to withstand the rigors of hard enduro riding. We offer a full 1-year product replacement guarantee that covers any manufacturing defects in materials and workmanship. This warranty does not cover damage or breakage caused by improper installation, failure to follow provided instructions, or lack of proper clearance on soft suspension setups. This warranty also does not cover normal wear and tear, as that does not affect the functional strength of the strap.
FRONT STRAP

- Soft Suspension Clearance: To prevent contact during full suspension compression on very soft setups, rotate the mount assembly slightly outward to move the strap bolts away from the fork guards. Alternatively, you can trim the upper tips of the plastic fork guards to ensure total clearance.

- Aftermarket Protectors: If you are using aftermarket plastic/carbon protectors or full-wrap guards, note that some brands may require minor trimming or modifications to achieve a proper, flush fit.

⚡EXPEDITED SHIPPING NOW AVAILABLE | CONTINENTAL US ONLY 🚚

< Back to Home

2016-2027 Beta Pro Racing XT Pull Strap Kit (Front + Rear) | NSX Factor

Product Features

Fitment

Installation Instructions

Warranty Policy

Return Policy

Cleaning Guide

Pro-Tips

Custom Setups

SUBSCRIBE