Front Lift Strap
Use the following Hardware:
- 01 Lift strap.
- 04 aluminum tabs.
- 02 bolts.
- 02 flanged nuts.
- 04 zip ties.
Installation Instructions:
1. Loop one side of the strap around the fork (under the triple clamp).
2. Insert one of the bolts to the rectangular aluminum tab.
3. Insert the bolt together with the tab in the hole of the strap (from the outside).
4. Insert the bolt through the second hole (hole in the tip of the strap).
5. Insert the second tab and then secure the nut (loosely).
6. Loop a zip tie around the fork on the upper part of the triple clamp.
7. Once it's all in place, insert a 2nd zip tie from under the strap and loop it to the 1st zip tie (step 6).
8. Adjust both zip ties and then the bolt & nut firmly.
9. Repeat the installation process for the other side.
Installation Video
Note: Take a look at the pictures to help you understand how you should place the bolt, nut and tabs as well as the zip ties correctly.
Rear Lift Strap
Installation WITH tail light:
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (40mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Fold the tip of the strap.
2. Insert the bolt into the 3rd hole of the Strap (3rd hole from the tip).
3. Insert the bolt to the 1st hole.
4. Insert the bolt to the aluminum spacer.
5. Tighten the bolt to the dirt bike.
6. Repeat on the other side.
Note: Please take a look at the pictures for correct installation.
Installation WITHOUT tail light:
Use the following Hardware:
- 01 Rear Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Fold the tip of the strap.
2. Insert the bolt to the 3rd hole of the Strap (3rd hole from the tip).
3. Insert the bolt to the 1st hole.
4. Insert the bolt to the aluminum spacer.
5. Tighten the bolt to the dirt bike.
6. Repeat on the other side.
Note: Please take a look at the pictures for correct installation.
