Engineered to offer the rider a rugged and efficient accessory to pull out the dirt bike when stuck in between rocks, loose sand, fesh-fesh or any other terrain. With the Lift Strap Kit, you’ll be able to rapidly pull out the dirt bike and get back on track.
KTM 2020-2025 Lift Strap Kit 2.0
- Lightweight & built to endure.
- Easy & fast installation.
- Installation doesn’t require disassembly of any major parts of the dirt bike.
- 100% Double nylon.
- 100% Abrasion resistant neoprene handle cover.
This part has been specially designed for KTM 2020 - 2025 Off-road/Enduro dirt bikes all 2T & 4T models (250cc to 500cc).
FRONT LIFT STRAP
Use the following Hardware:
- 01 Lift strap.
- 04 T-shaped aluminum tabs.
- 02 Button socket head cap bolts (25mm M6 bolts).
- 02 Button socket head cap bolts (20mm M4 bolts).
- 02 flanged serrated nuts (M6).
- 02 flanged nuts (M4).
- 04 zip ties.
Installation Instructions:
1. Loop one side of the strap around the fork (under the triple clamp).
2. Insert one of the 25mm M6 bolts to the T-shaped aluminum tab.
3. Insert the 25mm M6 bolt with the T-shaped aluminum tab into the big hole of the strap (from the outside part of the strap).
4. Insert the bolt through the second hole (big hole in the tip of the strap).
5. Insert the second tab and then secure the M6 flanged serrated nut (loosely).
6. Insert the 20mm M4 bolt to the T-shaped aluminum tab and pass it all the way through.
7. Secure the M4 flanged nut (loosely).
8. Loop a zip tie around the fork on the upper part of the triple clamp.
9. Insert a 2nd zip tie from under the strap and loop it to the 1st zip tie.
10. Adjust both zip ties and then fix the bolts & nuts firmly. Note: You can add a small drop of Loctite (242 Blue) between the bolts & nuts to keep them always secured.
11. Repeat the installation process on the other side.
Note: Take a look at the pictures to help you understand how you should place correctly the bolts, nuts and tabs as well as the zip ties.
REAR LIFT STRAP FOR ALL MODELS 2020-2023 EXCEPT XC/SX
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex Head Screws (40mm).
- 02 Unthreaded Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 3rd hole (3rd hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the head head screw under the fender.
4. Repeat on the other side.
Note 01: Take a look at the pictures for correct installation.
Note 02: We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
Note 03: If you have Acerbis plastics installed on your 2020-23 dirt bike, use the 2nd hole for an adequate fitment (2nd hole from the tip).
Note 04: To ensure the tire doesn't come into contact with the strap, during installation position the strap towards the front of the bike. This will help prevent the strap from twisting or turning towards the back when you tighten it.
REAR LIFT STRAP FOR 2020-2023 XC/SX MODELS
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex Head Screws (25mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 2nd hole (2nd hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
Note 01: Take a look at the pictures for correct installation.
Note 02: We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
Note 03: To ensure the tire doesn't come into contact with the strap, during installation position the strap towards the front of the bike. This will help prevent the strap from twisting or turning towards the back when you tighten it.
REAR LIFT STRAP FOR ALL 2024 & 2025 MODELS EXCEPT XC/SX
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex Head Screws (40mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 1st hole (1st hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
Note 01: Take a look at the pictures for correct installation.
Note 02: We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
Note 03: To ensure the tire doesn't come into contact with the strap, during installation position the strap towards the front of the bike. This will help prevent the strap from twisting or turning towards the back when you tighten it.
REAR LIFT STRAP FOR 2024 & 2025 XC/SX MODELS
Use the following Hardware:
- 01 Rear lift strap.
- 02 Hex Head Screws (25mm).
- 02 Aluminum Spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer and then to the 1st hole (1st hole from the tip of the strap).
2. Insert the hex head screw to the aluminum spacer.
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
Note 01: Take a look at the pictures for correct installation.
Note 02: We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
Note 03: To ensure the tire doesn't come into contact with the strap, during installation position the strap towards the front of the bike. This will help prevent the strap from twisting or turning towards the back when you tighten it.
- All sales are final.
- No refunds accepted.
- Exchange Policy: Product returns are only accepted due to manufacturing defects, prior to installation or use of the product.