Use the following Hardware for all models with tail light except XC/SX models:
- 01 Lift strap.
- 02 Hex Head Screws (40mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Insert the hex head screw to the 2nd hole (2nd hole from the tip of the strap).
2. Insert the hex head screw to the 1st hole.
3. Insert the hex head screw to the spacer.
4. Fix the head head screw under the fender.
5. Repeat on the other side.
Note: If you have Acerbis plastics installed on your dirt bike, use the first hole for an adequate fitment (first hole from the tip).
Use the following Hardware for all models without tail light except XC/SX models:
- 01 Lift strap.
- 02 Hex Head Screws (40mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Insert the hex head screw to the aluminum spacer.
2. Insert the hex head screw to the 2nd hole (2nd hole from the tip of the strap).
3. Insert the hex head screw to the 1st hole.
4. Fix the head head screw under the fender.
5. Repeat on the other side.
Note: If you have Acerbis plastics installed on your dirt bike, use the first hole for an adequate fitment (first hole from the tip).
Use the following Hardware for XC/SX models:
- 01 Lift strap.
- 02 Hex Head Screws (25mm).
- 02 Unthreaded Spacers.
Installation Instructions:
1. Insert the hex head screw to the spacer.
2. Insert the hex head screw to the 1st hole (1st hole from the tip of the strap).
3. Fix the hex head screw under the fender.
4. Repeat on the other side.
Note: Take a look at the pictures for correct installation.
