As Enduro riders, once the dirt bike gets out of track, returning it into riding position might prove to be a difficult task and can result in a loss of valuable time. It demands significant effort and creates a situation where an error can lead to a major failure.
KTM 2017-2019 Rear Lift Strap 2.0
- Lightweight & built to endure.
- Easy & fast installation.
- 100% Double nylon.
- 100% Abrasion resistant neoprene handle cover.
This part has been specially designed for all KTM 2017 - 2019 Off-road / Enduro dirt bikes (250cc to 500cc) 2 stroke and 4 stroke models.
REAR LIFT STRAP (ALL MODELS 2017-2019 EXCEPT XC/SX)
Use the following Hardware:
- 01 Rear lift strap.
- 02 25mm Hex head screws.
- 02 Washers.
Installation Instructions:
1. Insert the bolt to the washer.
2. Fold the tip of the strap.
3. Insert the bolt with the washer into the 2nd hole of the strap (2nd hole from the tip).
4. Insert the bolt to the 1st hole.
5. Tighten the bolt to the dirt bike.
6. Repeat on the other side.
Note 01: Please take a look at the pictures for correct installation.
Note 02: We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
Note 03: To ensure the tire doesn't come into contact with the strap, during installation position the strap towards the front of the bike. This will help prevent the strap from twisting or turning towards the back when you tighten it.
REAR LIFT STRAP (ONLY FOR 2017-2018 XC/SX MODELS)
Use the following Hardware:
- 01 Rear Lift strap.
- 02 25mm Hex Head Screws.
- 02 washers.
- 02 Aluminum spacers.
Installation Instructions:
The rear lift strap must be fixed under the fender using the factory cupped washer, then the unthreaded aluminum spacer, then the strap (2nd hole from the tip), then the washer and finally the bolt.
Note 01: Please take a look at the pictures for correct installation.
Note 02: We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
Note 03: To ensure the tire doesn't come into contact with the strap, during installation position the strap towards the front of the bike. This will help prevent the strap from twisting or turning towards the back when you tighten it.
REAR LIFT STRAP (ONLY FOR 2019 XC/SX MODELS)
Use the following Hardware:
- 01 Lift strap.
- 02 25mm Hex head screws.
- 02 Aluminum spacers.
- 02 Washers.
Installation Instructions:
1. Insert the hex head screw to the washer.
2. Insert the hex head screw to the 2nd hole (2nd hole from the tip of the strap).
3. Insert the bolt to the aluminum spacer.
4. Fix the head head screw under the fender.
5. Repeat on the other side.
Note 01: Take a look at the pictures for correct installation.
Note 02: We recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
Note 03: To ensure the tire doesn't come into contact with the strap, during installation position the strap towards the front of the bike. This will help prevent the strap from twisting or turning towards the back when you tighten it.
- All sales are final.
- No refunds accepted.
- Exchange Policy: Product returns are only accepted due to manufacturing defects, prior to installation or use of the product.