FRONT LIFT STRAP
Use the following Hardware:
- 01 Lift strap.
- 04 T-shaped aluminum tabs.
- 02 Button socket head cap bolts (25mm M6 bolts).
- 02 Button socket head cap bolts (20mm M4 bolts).
- 02 flanged serrated nuts (M6).
- 02 flanged nuts (M4).
- 04 zip ties.
Installation Instructions:
1. Loop one side of the strap around the fork (under the triple clamp).
2. Insert one of the 25mm M6 bolts to the T-shaped aluminum tab.
3. Insert the 25mm M6 bolt with the T-shaped aluminum tab into the big hole of the strap (from the outside part of the strap).
4. Insert the bolt through the second hole (big hole in the tip of the strap).
5. Insert the second tab and then secure the M6 flanged serrated nut (loosely).
6. Insert the 20mm M4 bolt to the T-shaped aluminum tab and pass it all the way through.
7. Secure the M4 flanged nut (loosely).
8. Loop a zip tie around the fork on the upper part of the triple clamp.
9. Insert a 2nd zip tie from under the strap and loop it to the 1st zip tie.
10. Adjust both zip ties and then fix the bolts & nuts firmly. Note: You can add a small drop of Loctite (242 Blue) between the bolts & nuts to keep them always secured.
11. Repeat the installation process on the other side.
Note: Take a look at the pictures to help you understand how you should place correctly the bolts, nuts and tabs as well as the zip ties.
REAR LIFT STRAP
IMPORTANT: TAIL LIGHT PLASTIC MUST BE REMOVED.
Use the following Hardware:
- 01 Lift strap.
- 02 25mm Hex Head Screws.
- 02 Washers.
Installation Instructions:
1. Fold the tip of the strap.
2. Insert the bolt into the washer.
3. Insert the bolt to the 3rd hole of the strap (3rd hole from the tip).
4. Insert the bolt to the 1st hole.
5. Tighten the bolt to the dirt bike.
6. Repeat on the other side.
Note: Please take a look at the pictures for correct installation. Also, we recommend to add a small drop of Loctite (242 Blue) on the bolts to keep them always secured.
